Wire definitions
Piano Wire
Hardened spring steel
220–2300 N/mm²
Hard Wire
Spring steel, steel nails
1600–1800 N/mm²
Medium Hard Wire
Iron, nails
750–800 N/mm²
Soft Wire
Copper, aluminium
220–250 N/mm²
N/mm² = tensile strength of wire
back  next
Tungsten Carbide Cutters
At our Online Shop you will find our most popular products for the electronic and micromechanic industries - our bestsellers. Usually the are delivered from the warehouse within 24 hours.

Further sorts of pliers can be found on Amazon Online shop.

For all the other pliers and cutters there is also the possibility to manufacture them at the earliest possible opportunity. Unfortunately, in this case we are not able to confirm a fixed delivery date.

We are pleased to receive your orders/inquiries for items that are not available in our shop by e-mail at info@schmitz-zangen.de. As a wholesaler, distributor or reseller please ask for special conditions.
TUNGSTEN-CARBIDE SIDE CUTTER
Tapered head. Small version.
  Bevel Piano hard  soft weight g length mm/"
3426HS22 with 0.2/34 0.6/22 1.6/14 55 120/4.3/4
3427HS22 fine 0.2/34 0.6/22 1.6/14 55 120/4.3/4
3429HS22 Nur für Glasfaser, z.B. Kevlar® 55 120/4.3/4
3426HS12 with 0.2/34 0.6/22 1.6/14 50 115/4.1/2
3427HS12 fine 0.2/34 0.6/22 1.6/14 50 115/4.1/2
3429HS12 Nur für Glasfaser, z.B. Kevlar® 50 115/4.1/2
3426HS02 with 0.2/34 0.6/22 1.6/14 45 110/4.1/4
3427HS02 fine 0.2/34 0.6/22 1.6/14 45 110/4.1/4
3429HS02 Nur für Glasfaser, z.B. Kevlar® 45 110/4.1/4
TUNGSTEN-CARBIDE SIDE CUTTER
Tapered head. Relieved jaws.
  Bevel Piano hard  soft weight g length mm/"
3431HS22 with 0.4/26 0.8/20 1.8/13 61 125/5
3432HS22 fine 0.4/26 0.8/20 1.8/13 61 125/5
3435HS22 Nur für Glasfaser, z.B. Kevlar® 61 125/5
3431HS12 with 0.4/26 0.8/20 1.8/13 56 120/4.3/4
3432HS12 fine 0.4/26 0.8/20 1.8/13 56 120/4.3/4
3435HS12 Nur für Glasfaser, z.B. Kevlar® 56 120/4.3/4
3431HS02 with 0.4/26 0.8/20 1.8/13 51 115/4.1/2
3432HS02 fine 0.4/26 0.8/20 1.8/13 51 115/4.1/2
3435HS02 Nur für Glasfaser, z.B. Kevlar® 51 115/4.1/2
TUNGSTEN-CARBIDE SIDE CUTTER
Tapered head. Relieved jaws. Small version.
  Bevel Piano hard  soft weight g length mm/"
3436HS22 with 0.2/34 0.6/22 1.6/14 53 120/4.3/4
3437HS22 fine 0.2/34 0.6/22 1.6/14 53 120/4.3/4
3439HS22 Nur für Glasfaser, z.B. Kevlar® 53 120/4.3/4
3436HS12 with 0.2/34 0.6/22 1.6/14 48 115/4.1/2
3437HS12 fine 0.2/34 0.6/22 1.6/14 48 115/4.1/2
3439HS12 Nur für Glasfaser, z.B. Kevlar® 48 115/4.1/2
3436HS02 with 0.2/34 0.6/22 1.6/14 43 110/4.1/4
3437HS02 fine 0.2/34 0.6/22 1.6/14 43 110/4.1/4
3439HS02 Nur für Glasfaser, z.B. Kevlar® 43 110/4.1/4
TUNGSTEN-CARBIDE SIDE CUTTER
Oval head. Strong version.
  Bevel Piano hard  soft weight g length mm/"
3441HS22 with 0.8/20 1.2/16 2.2/11 110 140/5.3/4
3442HS22 fine 0.8/20 1.2/16 2.2/11 110 140/5.3/4
3445HS22 Nur für Glasfaser, z.B. Kevlar® 110 140/5.3/4
3441HS12 with 0.8/20 1.2/16 2.2/11 105 135/5.3/8
3442HS12 fine 0.8/20 1.2/16 2.2/11 105 135/5.3/8
3445HS12 Nur für Glasfaser, z.B. Kevlar® 105 135/5.3/8
3441HS02 with 0.8/20 1.2/16 2.2/11 100 130/5.1/8
3442HS02 fine 0.8/20 1.2/16 2.2/11 100 130/5.1/8
3445HS02 Nur für Glasfaser, z.B. Kevlar® 100 130/5.1/8
TUNGSTEN-CARBIDE SIDE CUTTER
Tapered head. Strong version.
  Bevel Piano hard  soft weight g length mm/"
3451HS12 with 0.6/22 1.0/18 2.0/12 105 135/5.3/8
3452HS12 fine 0.6/22 1.0/18 2.0/12 105 135/5.3/8
3455HS12 Nur für Glasfaser, z.B. Kevlar® 105 135/5.3/8
3451HS02 with 0.6/22 1.0/18 2.0/12 100 130/5.1/8
3452HS02 fine 0.6/22 1.0/18 2.0/12 100 130/5.1/8
3455HS02 Nur für Glasfaser, z.B. Kevlar® 100 130/5.1/8
Alle Schneidwerte in den Tabellen werden in mm/AWG angegeben.
123