Wire definitions
Piano Wire
Hardened spring steel
220–2300 N/mm²
Hard Wire
Spring steel, steel nails
1600–1800 N/mm²
Medium Hard Wire
Iron, nails
750–800 N/mm²
Soft Wire
Copper, aluminium
220–250 N/mm²
N/mm² = tensile strength of wire
  next
Cutters
At our Online Shop you will find our most popular products for the electronic and micromechanic industries - our bestsellers. Usually the are delivered from the warehouse within 24 hours.

Further sorts of pliers can be found on Amazon Online shop.

For all the other pliers and cutters there is also the possibility to manufacture them at the earliest possible opportunity. Unfortunately, in this case we are not able to confirm a fixed delivery date.

We are pleased to receive your orders/inquiries for items that are not available in our shop by e-mail at info@schmitz-zangen.de. As a wholesaler, distributor or reseller please ask for special conditions.
SIDE CUTTER
Oval head. Small version.
 Bevelhardmedium softweight glength mm/"
3101HS22 with0.3/28 0.8/201.5/1555 120/4.3/4
3102HS22 fine 0.8/201.5/1555 120/4.3/4
3103HS22 without 0.6/221.5/1555 120/4.3/4
3101HS12 with0.3/28 0.8/201.5/1550 115/4.1/2
3102HS12 fine 0.8/201.5/1550 115/4.1/2
3103HS12 without 0.6/221.5/1550 115/4.1/2
3101HS02 with0.3/28 0.8/201.5/1545 110/4.1/4
3102HS02 fine 0.8/201.5/1545 110/4.1/4
3103HS02 without 0.6/221.5/1545 110/4.1/4
SIDE CUTTER
Oval head. With wire catch. Small version.
 Bevelhardmedium softweight glength mm/"
3111HS22 with 0.3/28 0.8/201.5/1565 120/4.3/4
3112HS22 fine 0.8/201.5/1565 120/4.3/4
3113HS22 without 0.6/221.5/1565 120/4.3/4
3111HS12 with 0.3/28 0.8/201.5/1560 115/4.1/2
3112HS12 fine 0.8/201.5/1560 115/4.1/2
3113HS12 without 0.6/221.5/1560 115/4.1/2
3111HS02 with 0.3/28 0.8/201.5/1555 110/4.1/4
3112HS02 fine 0.8/201.5/1555 110/4.1/4
3113HS02 without 0.6/221.5/1555 110/4.1/4
SIDE CUTTER
Tapered head. Small version.
 Bevelhardmedium softweight glength mm/"
3121HS22 with 0.2/34 0.8/201.5/1555 120/4.3/4
3122HS22 fine 0.8/201.5/1555 120/4.3/4
3123HS22 without 0.6/221.5/1555 120/4.3/4
3121HS12 with 0.2/34 0.8/201.5/1550 115/4.1/2
3122HS12 fine 0.8/201.5/1550 115/4.1/2
3123HS12 without 0.6/221.5/1550 115/4.1/2
3121HS02 with 0.2/34 0.8/201.5/1545 110/4.1/4
3122HS02 fine 0.8/201.5/1545 110/4.1/4
3123HS02 without 0.6/221.5/1545 110/4.1/4
SIDE CUTTER
Tapered head. Relieved jaws. Small version.
 Bevelhardmedium softweight glength mm/"
3131HS22 with 0.8/201.5/1553 120/4.3/4
3132HS22 fine 0.8/201.5/1553 120/4.3/4
3133HS22 without 0.6/221.5/1553 120/4.3/4
3131HS12 with 0.8/201.5/1548 115/4.1/2
3132HS12 fine 0.8/201.5/1548 115/4.1/2
3133HS12 without 0.6/221.5/1548 115/4.1/2
3131HS02 with 0.8/201.5/1543 110/4.1/4
3132HS02 fine 0.8/201.5/1543 110/4.1/4
3133HS02 without 0.6/221.5/1543 110/4.1/4
SIDE CUTTER
Half-oval head. Small version, yet strong.
 Bevelhardmedium softweight glength mm/"
3241HS22 with 0,4/26 1.0/182.0/1260 120/4.3/4
3242HS22 fine 1.0/182.0/1260 120/4.3/4
3243HS22 without 0.8/202.0/1260 120/4.3/4
3241HS12 with 0,4/26 1.0/182.0/1255 115/4.1/2
3242HS12 fine 1.0/182.0/1255 115/4.1/2
3243HS12 without 0.8/202.0/1255 115/4.1/2
3241HS02 with0,4/26 1.0/182.0/1250 110/4.1/4
3242HS02 fine 1.0/182.0/1250 110/4.1/4
3243HS02 without 0.8/202.0/1250 110/4.1/4
Alle Schneidwerte in den Tabellen werden in mm/AWG angegeben.
123456